Freebuzz Bootable Maker | Making a USB Drive to Install Any PC Operating System
Have an USB drive ( flash )? Turn it into an operating
install disk for Windows, Linux or Mac, or a
diagnostic tool for your PC.
Need to install Windows Vista, 7, and 8.on a
computer with no DVD drive? Do you want to create
a backup installer in case your install disc becomes damaged?
use Freebuzz Bootable Creator , This Soft will create
a USB drive that is bootable. You can then copy the
contents of an operating installation disc onto the
drive to create a portable installation drive.
1. First plug-in your USB stick to your USB p.o.r.t and copy all the content to a safe location in your hard
drive .
2. Run Freebuzz Bootable Creator as an
administrator
3. Select The Disk (flash) you wanna Make Bootable
* on select disk be scrupulous because this will fromat selected disk so be sure your selected this is
desire usb flash
4. Click Start and Wait Untill Get Finish Result
5. Copy the operating system. Once the USB drive
has been made bootable, you can copy over the
installation files for the operating system you want
to install. You can do this by dragging and
dropping using your preferred file manager/ explorer. Copy over any drivers you might need
during the operating system installation to make
the process much smoother. The safest and the
fastest way would be to use the Windows Explorer.
Open the disk, select everything, and drag it into
your flash drive. This could take a few minutes to copy. 6. Change the boot order. To boot from the USB
drive, you will have to set the BIOS to boot from USB
first instead of the hard drive. To open the BIOS,
reset your computer and hit the displayed key to
enter Setup. The key varies by manufacturer, but is
usually F2, F10, F12, or Del. * Open the Boot menu in your BIOS. Change the 1st
Boot Device to your USB drive. Be sure that it is
inserted, or you may not be given an option to
choose it. Depending on your manufacturer, it may
say Removable Device or list your flash drive’s
model. 7.Save changes and reboot. If you set the boot
order correctly, your Windows 7 or Vista
installation will load after the manufacturer’s logo
disappears. NOTE : This Soft only works in Windows Vista, 7,
and 8 ; dont use on other oprating systems. we Hope this will round your work head tag: Create a Bootable Drive , make bootable flash
install windows thru flash, Make a USB Bootable,
[You must be registered and logged in to see this link.] By
[You must be registered and logged in to see this link.]